Residual Risks
• The following risks are inherent to the use of
these machines:
– Injuries caused by touching the rotating
parts.
– Injuries caused by disruption of the cutting
disc.
• These risks are most evident:
– Within the range of operation.
– Within the range of the rotating machine
parts.
• In spite of the application of the relevant
safety regulations and the implementation of
safety devices, certain residual risks cannot be
avoided. These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered
parts of the rotating cutting disc.
– Risk of injury when changing the disc.
– Risk of squeezing fingers when opening the
guards.
Package Contents
The package contains:
1 Chop saw
1 Hex key
1 Instruction manual
1 Wheel
•
Check for damage to the tool, parts or
accessories which may hav
e occurred during
transport.
•
Take the time to thoroughly read and understand
this manual prior to operation.
INTENDED USE
Your
D28871
chop saw has been designed for the
cutting of variously shaped steel materials.
DO NOT
use under wet conditions or in presence of
flammable liquids or gases.
The
D28871
chop saw is a professional power tool.
DO NOT
let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your
D
E
WALT
tool is double insulated;
therefore no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
E
WALT
service organisation.
Markings on Tool
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Bore Diameter.
DATE CODE POSITION
The date code (R), which also includes
the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
2013 XX XX
Year of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
