DeWalt D28114N-XE, Инструкция по эксплуатации

Страница: 9 / 20

7
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior to
operation.
COMPONENTS (Fig. 1)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Paddle switch
F. Quick-change backing flange
B. Spindle lock button G. Threaded clamp nut
C. Yellow rubber ring H. Type 27 guard
D. Anti-vibration side handle (D, Fig. 2) I. Dust Ejection System™ (DES)
E. 5" Grinding wheel (Type 27)
A
B
E
H
I
FIG. 1
C
F
I
G
INTENDED USE
The D28114N-XE heavy-duty small angle grinder has been designed for professional
grinding, polishing and cutting applications.
DO NOT use grinding wheels other than center depressed wheels and flap-disk.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This small angle grinder is a professional power tool.
DO NOT let children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
E-Switch Protection™
The paddle switch has a no-volt release function. In the event of a power outage or
other unexpected shut down, the switch needs to be cycled (turned off and on) to
restart tool.
E-Clutch™
This unit is equipped with an E-Clutch™ (Electronic Clutch), which in the event of a
high-load or wheel pinch, the unit will shut off to reduce the reaction torque to the
user. The paddle switch needs to be cycled (turned off and on) to restart the tool.
Power-off™ Overload Protection
The power supply to the motor will be reduced in case of motor overload. With
continued motor overload, the tool will shut off. The paddle switch must be cycled
(turned off and on) to restart tool. The power will return to normal once the tool has
cooled down to a suitable operating temperature. Note: Run the tool at no load to
reduce the cool down time.
Complete Electronic Control™
The internal electronic speed control offers consistent wheel speed while using the
tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn off and unplug the
tool before making any adjustments or removing or installing attachments or
accessories. Before reconnecting the tool, depress and release the paddle switch to
ensure that the tool is off. An accidental start-up can cause injury.