DeWalt D28000-XE, Инструкция по эксплуатации

Страница: 15 / 20

13
Guarantee
Applicable to hand held Power Tools, Lasers and Nailers.
Three Year Limited Warranty
D
E
WALT will repair, without charge, any defects due to faulty materials or
workmanship for three years from the date of purchase. Please return the complete
unit, transportation prepaid, to any D
E
WALT Service Centre, or any authorised
service station.
For warranty repair information, call (AUS) 1800 654 155 or (NZ) 0800 339258.
This warranty does not apply to
• Accessories
• Damage caused where repairs have been made or attempted by others.
• Damage due to misuse, neglect, wear and tear, alteration or modification.
This warranty gives you specific legal rights and you may have other rights under the
provisions of the Consumer Guarantee Act 1993 (New Zealand only), Trade Practices
Act 1974 and State Legislation (Australia only).
In addition to the warranty, D
E
WALT tools are covered by our:
FREE ONE YEAR SERVICE CONTRACT
D
E
WALT will also maintain the tool for free at any time during the first year of
purchase. This includes labour, parts and lubrication required to restore the product to
sound mechanical and/or electrical condition. Normal wear parts are not covered in
this service. Carbon brushes worn more then 50% will be replaced.
NOTE: Three Year Warranty is not applicable to items deemed as consumables. Radial
arm saws are covered by a one (1) year warranty only. D
E
WALT Reserves the right to
review its warranty policy prior to launch of any new business development products.
30 DAY NO SATISFACTION GUARANTEE
If you are dissatisfied with any D
E
WALT power tool, laser or nailer, for any reason,
simply return it to the point of purchase with your sales receipt within 30 days for a
replacement unit or a full refund.
Reverse above procedures to finish brush change.
WARNING: Make sure all screws are correctly fitted and tightened before
re-connecting the tool to power supply.
Cleaning
WARNING: Blowing dust and grit out of the motor housing using clean, dry
compressed air is a necessary regular maintenance procedure. Dust and grit
containing metal particles often accumulate on interior surfaces and could create an
electrical shock or electrocution if not frequently cleaned out. ALWAYS WEAR SAFETY
GLASSES.
CAUTION: Never use solvents or other harsh chemicals for cleaning the non-metallic
parts of the tool. Use a clean, dry rag only.
Lubrication
D
E
WALT tools are properly lubricated at the factory and are ready for use.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers or other qualified service personnel.
Always use identical replacement parts.
Purchasing Accessories
WARNING: Since accessories, other than those offered by D
E
WALT, have not been
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
E
WALT, recommended accessories should be used
with this product.
Recommended accessories for use with your tool are available at extra cost from
your local service center. If you need any assistance in locating any accessory,
please contact D
E
WALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138
Australia or call 1800 654 155 or (NZ) 0800 339258.
WARNING: Accessories must be rated for at least the speed recom mended on the
tool warning label. Wheels and other accessories running over rated speed can fly
apart and cause injury. Accessory ratings must always be above tool speed as shown
on tool nameplate.