DeWalt D271059, Оригинальное руководство пользователя

Страница: 22 / 84

20
E N G L I S H
Switching on and off (fi g. A)
• To switch on the laser, press the on/off switch (1)
into position “I”.
• To switch off the laser, press the on/off switch (1)
into position “0”.
Performing a cut
• Draw a cutting line on the workpiece.
• Place the workpiece against the fence.
• Switch on the laser.
• Align the cutting line with the laserline.
• Switch on the tool and perform the cut.
• After completing the cut, switch off the tool and
wait for the saw blade to come to a complete
standstill before returning the head to its upper
rest position.
• Switch off the laser.
MAINTENANCE
Your attachment has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Cleaning
Regularly clean the attachment with a soft cloth.
• The adjustment screws on the laser head can
become clogged with sawdust. Use some low
pressure air to clear the adjustment screws.
• When necessary, clean the lens using a soft cloth
or a cotton bud soaked in alcohol. Do not use
any other cleaning agents.
Cleaning the laser window (fi g. F)
The performance of the laser may degrade over time
due to accumulated dust on the laser window. If the
laser window needs to be cleaned, proceed as follows.
• Raise the saw head into its upper rest position.
• Loosen the screws (9) and remove them.
• Slide the laser window (5) out of the recessed area.
• Carefully remove dust from the window. Use a
soft cloth and mild soap if necessary.
• Slide the laser window (5) into the recessed area.
Make sure that the notch (8) is facing up.
• Fit the laser window (5) using the screws (9).
Protecting the Environment
Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your D
E
WALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a
new product.
D
E
WALT provides a facility for the collection and
recycling of D
E
WALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local D
E
WALT office
at the address indicated in this manual. Alternatively, a
list of authorised D
E
WALT repair agents and full details
of our after-sales service and contacts are available
on the Internet at:
www.2helpU.com .