Devolo Magic 2 LAN1-1, Руководство пользователя

Страница: 15 / 32

15 Introduction
devolo Magic 2 LAN
* Information about the web interface can be found in Chapter 4
Configuration .
** Information on improving the transmission rate can be found
in Chapter
5.2 Bandwidth optimization .
***A devolo Magic adapter switches to standby mode after ap-
proximately 10 minutes if no active network device (e.g. comput-
er) is connected to the network interface. In this mode, the
devolo Magic adapter cannot be accessed over the electrical wir-
ing. As soon as the network device (e.g. computer) connected to
the network interface is switched on again, your devolo Magic
adapter can also be accessed over the electrical wiring again.
Check whether the adapter is connected to the mains
supply correctly and whether the pairing operation has
been carried out successfully. For more information about
this, refer to
3.3 Connecting the devolo Magic 2 LAN
.
2.3.2 Network connection
You can use the network connection on the devolo Magic adapt-
er to connect it to a PC or television using a standard network ca-
ble.
2.3.3 Integrated electrical socket
Always use the integrated electrical socket on the devolo Magic
adapter when connecting other consumers to the mains supply.
6 White LED Lights up steady The devolo Magic connection does not have any issues
and the devolo Magic adapter is ready to operate. Can be disabled
7 White LED Flashes at intervals
of
0.1
sec. on /
5 sec. off
The devolo Magic adapter is in standby mode.*** Can be disabled
8 Red and
white LED Flashes at intervals
of
0.5 sec. red /
0.5 sec. white
The devolo Magic adapter is carrying out a firmware
update. Cannot be dis-abled
LED Flashing behaviour Meaning
LED status display (web
interface*)