Devolo Magic 1 WiFi 2-1, Руководство пользователя

Страница: 23 / 53

23 Initial use
devolo Magic 1 WiFi
3.3.2 Addition – Expanding an existing PLC net-
work by adding another
devolo Magic 1 WiFi
Before you can use the devolo Magic 1 WiFi in your
devolo Magic network, first you have to connect it to your
existing devolo Magic adapters as a network. This is ac-
complished by using a shared password.

Plug the devolo Magic 1 WiFi into an available power
socket. As soon as the LED flashes white at regular
intervals of 0.5 seconds, the adapter is ready to ope-
rate but not yet integrated into a devolo Magic net-
work (see Chapter
2.3.1 Reading the PLC indicator
light ).

Within 3 minutes, press the PLC button on a
devolo Magic adapter in your existing devolo Magic
network for approximately 1 sec.
If the LEDs light up white on both devolo Magic
adapters, the new adapter has been successfully
integrated into your existing devolo Magic net-
work.
For each pairing operation, only one additional adap-
ter can be added at a time.
3.3.3 Changing the network password
A network password can also be changed in the following
ways:
Using the web interface of the devolo Magic adapter
(see Chapter 4.5 Powerline )
or
Using devolo Cockpit or the devolo app . For more
information, refer to the following chapter.
3.3.4 Integrating the devolo Magic 1 WiFi into
an existing WiFi network

Establish the WiFi connection with your laptop, tablet
or smartphone by entering the previously noted
WiFi key as the network security key (see Chapter
WiFi on/off ).

To ensure that the devolo Magic 1 WiFi has the same
WiFi configuration as your WiFi router, you can apply
the WiFi access data at the touch of a button using the
WiFi Clone function. This can be enabled in different
ways:
Activating WiFi Clone:
Activating WiFi Clone by pressing a button: First press
the
WiFi button with the WiFi icon on the front side of
the devolo Magic 1 WiFi and then press the WPS but-
ton of the WiFi router with the access data you want to
apply.
or