Devolo Magic 1 LAN1-1, Руководство пользователя

Страница: 13 / 36

13 Introduction
devolo Magic 2 LAN
1-1
b
One PLC/reset button (next to the network
connection)
b
One integrated electrical socket
2.3 Pairing
devolo Magic adapters that are in factory default
condition, i.e. have been purchased or successfully
reset (see Chapter
Resetting a devolo Magic ad-
apter or removing it from a devolo Magic net-
work
), automatically start to attempt to pair with
another devolo Magic adapter when reconnected
to the mains supply.
Starting up a new devolo Magic network
After plugging the devolo Magic adapters into
available power sockets, a new devolo Magic net-
work is established automatically within 3 minutes.
Expanding an existing devolo Magic network
by adding another devolo Magic adapter
In order to use a new devolo Magic 2 LAN
1-1
in
your devolo Magic- network, first you have to
connect it to your existing devolo Magic adapters
devices as a network. This is accomplished by using
a shared password, which can be assigned in va-
rious ways:
b
Using devolo Cockpit or the
devolo Home Netwok App (see Chapter 3.4
Installation of devolo software )
b
Using the web interface (see Chapter 4.2.2
Powerline )
b
Using the PLC/reset button as described
below.
1
To do so, plug the new devolo Magic adapter
into an available power socket and, for appro-
ximately 1 second, press the PLC/reset button
on a devolo Magic adapter in your existing
devolo Magic network.
Fig. 2: devolo Magic 2 LAN
1-1
with country-specific
connector and power socket