Devolo dLAN TV Sat PC, Руководство пользователя

Страница: 39 / 75

|
Configuration
39
|
devolo dLAN TV Sat PC
|
쎲
Using the Rename function, you can change the name of a channel in the
list using the computer keyboard. Edit the channel name and confirm the
entry with
Enter .
쎲
You can change the position of a channel in the list by selecting Move .
Using the arrow keys of the computer keyboard or on the devolo remote
control, determine the new position in the list of channels and press the
Enter or OK key.
Using the Scan Channels button, you can start the channel search described
above on the currently selected satellites.
Using the Add New Channel function, you can add a certain station to your list
of channels even if it is not otherwise found by the automatic channel search in
CyberLink TV Enhance. For this purpose, a wizard is started that prompts you to
enter the following information:
If necessary, first step up the desired satellite in CyberLink TV Enhance using
Menu
!
Menu
!
Settings
!
Signal Settings before adding a channel trans-
mitted by this satellite.
Satellite: From the up to four satellites you currently have configured, select
the one on which the channel you want to set up is offered.
Channel data: Enter the various parameters for the new channel here.
쎲
Transponder frequency in Mhz
쎲
Symbol rate (K symbol/SEC)
쎲
Polarisation (horizontal or vertical)
쎲
FEC rate (automatic or fixed value)
Transponder data : Finally, select the properties of the transponder:
쎲
Transponder type (DVB-S or DVB-S2)
쎲
Modulation (QPSK, BNBC_QPSK, 8PSK, 16APSK or 32APSK)
Now, the system searches for the specified channel on the satellite. If it is
found with sufficient quality, it is then added to the list of channels.
List by...
All available channels can be sorted automatically using the List by... function
on the left edge of the Manage Channels screen according to the following cri-
teria:
쎲
Alphabetically by channel name