6
Control Panel
Fig.2 Control Panel
OPERATION
Getting Started
•
Carefully remove the heater from the box and keep the carton for off-season storage.
•
Ensure the power switch (13) is turned off before plugging the unit in.
•
Make sure the heater is safely installed in accordance with the installation instructions.
•
It is best to avoid using the heater in an outlet that is already being used for other high-
power electrical equipment, to avoid overloading the circuit.
Power On
•
When the product is connected to the power supply, the power indicator (1) will illuminate,
and the Wi-Fi indicator (12) will begin to flash.
•
Press the power button (9) to switch the unit on.
Power Off
•
Hold the power button (9) for three seconds to switch the unit off.
Half Power and Full Power Selection
•
Press the heating power button (8) to change the power to partial or full load.
•
At full heating capacity, “HI” is shown in the display (3) and the half heating capacity (2)
"LO" is deactivated.
•
In the case of partial capacity heating, "LO" is activated on the display (2) and "HI" is
deactivated on the display (3).
8.
Select Full/Half Capacity Heat Mode
9.
Power/Set Button
10.
Timer Indicator
11.
Time Indicator
12.
Wi-Fi Indicator
13.
Power Switch
1.
Power Indicator
2.
Half Power Indicator (LO)
3.
Full Power Indicator (HI)
4.
Heating Indicator
5.
Temperature Measure (
℃
)
6.
Upward Adjustment Button
7.
Downward Adjustment Button