Operation:
Connect the appliance to a safety socket.
Turn the thermostat knob in the direction of clockwise until reaching the maximum
temperature.
Once the room temperature is reached, slowly turn the thermostat knob in the
direction of anticlockwise until you hear a click and then the heater will stop working.
If you want the heater to turn on and off automatically to maintain a specific room
temperature, turn the thermostat knob to your desired temperature.
Turn the switch to “0” position to switch off the heater. Unplug the appliance then
after.
Turbo Heating
This model is fitted with a heating fan which can work separately and can help to
heat up the room more quickly. To turn this function on, press the turbo speed button.
Timer Operation – Daily Schedule
1. Look at the time on your clock or watch. If it is 10.00am, turn the numbered
timer disk clockwise until the number 10 on the disk is in line with the arrow
pointer on the middle of the timer wheel.
2. The teeth on the timer that you push inwards towards the center will indicate
the times that the heater will be on.
3. Each tooth corresponds to a period of 15 minutes. This will leave visible
sectors which correspond to the periods of operation.
4. When set, the radiator will automatically operate each day during the times
programmed (important: the radiator must always be plugged into the
socket).
5. To change the programming, move the teeth back outwards to the initial
position and set the new periods of functioning.
6. If you want to make the appliance operate without programming, push all the
teeth into the centre. In this case, to turn the mains to avoid continued