Operating Instructions
Operation Panel
Power Switch
1. Plug in the power supply and the fan will enter the standby state. Press the power
switch button and the fan begins to operate. When used for the first time, the default
wind speed is level one. When the fan is turned off and turned on again, the fan defaults
to the wind speed of when it was last in operation.
2. When the fan is running, press the switch button and the fan stops working.
Oscillation
When the fan is running, press the oscillation button for the fan to swing left and right
and the oscillation indicator will illuminate. Press the oscillation button again and the
fan stops swinging and the indicator turns off.
Mode
When the fan is running, press the mode button to enter the wind mode selection state,
which is divided into four modes: normal wind, natural wind, sleep wind, and eco.
Normal wind is not shown on the display, while the other three wind modes have
corresponding indicator lights, as below.
Wind Mode Description
Normal Wind: The fan operates in the gear speed selected by the user until it’s
switched off or the timer switches it off.
Nature Wind: The fan speed is automatically varied to stipulate a natural sea breeze.
Sleep Wind: The selected wind speed is reduced by one gear every half an hour. This
MODE
NORMAL
NATURE
SLEEP
ECO
Display
Status
