2
x
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Let
the heater cool down before moving. Keep combustible materials, such as furniture, pillows,
bedding, paper, clothes and curtains at least 1m away from the front, sides and rear of the
heater.
ASSEMBLING
x
Do not operate the oil heater without the base support fixed correctly.
x
To fix the rear support base, fit it tightly against the fin, until it stays in
place.
x
To fix the front support base, fit it tightly against the bottom on the front
panel.
x
After fixing the supports, ensure that the heater is stable on the floor.
USING THE APPLIANCE
x
Set the thermostat to the minimal position and plug into a power suitable power source.
THERMOSTAT
x
The thermostat will automatically maintain your desired room temperature and will turn on
and off based on the temperature you set.
x
Turn the thermostat control clockwise all the way round until you hear a click, this sound
indicates that the oil heater is activated, the indicator light is ON. Continue turning the
thermostat control clockwise to its highest setting.
x
When the indicator light is ON, the heater is activated. This light turns ON and OFF
automatically according to whether the heater is on or off.
x
Turning the thermostat clockwise will always increase the set temperature; turning it
anticlockwise will decrease the set temperature.
NOTE:
x
The room must be sealed in good condition, if not, the heating will be less effective.
x
After use, turn the thermostat to the minimal position and unplug from power supply.
x
This heater is fit with tip-over protection so it will cease heating if it falls over.
MAINTENANCE AND CARE
x
The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this
may result the radiating efficient.
x
Unplug from the power supply and allow the appliance to cool down.
x
Wipe out with a soft damp cloth. Do not use detergent or abrasives.
x
Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty,
because of damage of the paint coat.
STORAGE
x
Ensure the oil heater is completely cool.
x
Roll up the power cord in the supports when the heater is not in
use.
x
Store the appliance in a cool, dry place.