background image

Safety instructions

This unit must be operated by, or under the supervision of an adult. This device is not suitable for children. 

Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow the instructions of this manual

- Make sure there is no damage caused by transport. If the device seems damaged from the outside, do not 
use it and contact your dealer for more information and consultation.
- To make sure the device maintains in perfect condition and for safe operation, it is necessary for the user to
follow the instructions and warning notes of this user manual.
- Damage caused by improper use or modifications to the device are not covered by warranty.
- This device does not have any user-serviceable parts inside. Servicing of this device needs to be done by 
qualified technicians.

Important notes regarding safety and health:

- Always keep the power cord away from other cables. 
- Never remove any warning or informative labels from the unit
- Never leave cables lying around
- Do not open the device and do not modify any hard- or software of this unit.
- Do not insert this object into air vents.
- Do not connect this device to a dimmerpack.
- Do not switch the system on and off frequently as this will reduce the lifespan of the device.
- Do not drive the inputs of the fixture with a signal larger than required to work at full performance.
- This device is designed for indoor use, avoid contact with water, moist or other liquids. Do not place items 
filled with liquids on top of the unit.
- Avoid nearby flames or heat sources, do not place this device near flammable liquids, gas or flammable 
items.

Any information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 27-08-2013 RV Revision date + author initials: 20-02-2014 RV

WARNING!

Always keep this device away from moisture and rain! Hazardous electrical shocks may occur!

WARNING!

Only connect this device to a matching power outlet. This device is intended to work on a 
specified AC currency. Connecting this device to power outlets with other voltages may result in 
permanent damage and possible hazardous situations, such as fire or electrical shocks!

WARNING!

Be careful with every operation of this device. Touching live wires inside and outside the unit 
may cause hazardous electrical shocks!

Содержание MX-4













Отзывы: