Volume control is too loud
Turn the volume down
The tone controls for certain
frequencies are too low or too high
Turn all the tone controls back to
12 o'clock and listen to see if
clipping is still audible.
Speaker or amplifier is faulty
If a speaker or amplifier is exposed
to a loud, distorted, or clipped
signal for a longer period of time,
this can cause permanent damage
to its internal components. If you
suspect that this is the case,
contact your local dealer for
assistance.
Sound is dull
The speaker's tweeter could be
faulty
Turn the speaker to an appropriate
volume (ensure that it's not too
loud) so that you can listen directly
to the tweeter close to your ear. If
the tweeter is not responding, it is
probably defective and you should
contact your dealer for assistance.
EQ incorrectly set up (also for
overly sharp sound)
Check that one (or more) of the
EQ slide controls are not set too
high and if they are, try returning
them to a more neutral position.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:23-09-2017 RV
Revision date and author's initials: -
