Technical specifications
Technical specifications microphone:
- Frequency: 614 ~ 638 MHz
- channels: 120 (2 channels, choose from 60 frequencies per microphone)
- oscillation-mode: PLL
- frequency stability: +/- 10 ppm
- modulation mode: FM
- radio frequency power: 10 ~ 30 mW (variable)
- audio frequency response: 40 ~ 18.000 Hz
- distortion: < 0.5%
- batteries: 2x AA, 1.5V
- using time: 8 ~ 20 hours (depends on battery quality)
Technical specifications receiver:
- frequency: 614 ~ 638 MHz
- channels: 120 (2 channels, choose from 60 frequencies per microphone)
- oscillation-mode: PLL
- frequency stability: +/- 10 ppm
- superheterodyne double-supersystem receiving
- sensitivity: -95 ~ -71 dBm
- audio frequency response: 40 ~ 18.000 Hz
- distortion: < 0.5%
- signal to noise ratio (S/N ratio): >110dB
- audio output: 800mV (1x 6.35mm mixed output jack, 2x separate balanced XLR)
- working power: 230V, 50 Hz
- power consumption:
- power connection: IEC C14
- power supply: AC 230V, 50 Hz
- 19 inch rack mountable, 1U
Dimensions:
-
Receiver: 483 (with rack ears) x 210 (without antennas connected) x 50 mm (with rubber feet)
- Microphone: 263 x 51 x 51 mm
Included in delivery:
2x wireless microphone
1x 19 inch rack mountable receiver
2x BNC type antenna for receiver
1x IEC C13 power cable to Schuko
1x IEC C13 power cable to UK
1x user manual
1x mono 6.35mm TS jack audio cable (mixed out)
2x set of 2 AA batteries (two batteries for each microphone)
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 3.0
Creation date + author initials: 27-03-2014 RV Revision date + author initials: 08-09-2015 RV