background image

12- ENG

D25690

STARTING

Prior to starting, refer to your engine manual for proper starting procedures
for your engine type.
1.

In a well ventilated outdoor area 

Add fresh high quality unleaded gasoline

with a pump octane rating of 86 or higher.  Do not overfill. Wipe up spilled
fuel before starting the engine. Refer to engine manual for correct procedure.

2.

Check engine oil level.

See Engine Operators Manual for correct procedure. 

NOTE: There will be a slight amount of oil in the engine from factory testing.
3.

Verify the filter screen

is in water inlet of pump. 

NOTE: 

Cone side faces out.

4.

Connect

water source to pump inlet.

NOTE:

Water source must provide a minimum of 5 gallons per minute at 20 p.s.i. 

5.

Connect

high pressure hose to pump outlet.

6.

If applying a chemical or cleaning solution

, see How To Siphon

Chemicals/Cleaning Solvents in Operation section of this manual.

7.

Turn water source on. NOTE: 

Failure to do so will cause damage to the

pump.

8.

Start engine.

See Engine operators Manual for correct procedure. 

NOTE: 

If

the engine does not start after two pulls, pull the trigger to relieve the
pressure. 

9.

Depress trigger on gun to start water flow. NOTE: Stand on a stable
surface

and grip gun/wand firmly with both hands. Expect the gun to kick

when triggered.

10. Release trigger to stop water flow.
11. Adjust spray for the task

being performed by changing quick connect

nozzle. See 

How To Use Wand

instructions in this section.

SHUTTING DOWN

1.

After each use,

if you have siphoned chemicals, siphon a bucket of clean

water through the chemical hose. 

NOTE: 

Failure to do so will cause damage

to the pump.

2.

Turn engine off.

See Engine Owner’s Manual. 

NOTE: NEVER

turn the water

off with the engine running.

3.

Turn water source off.

4.

Pull trigger on spray gun

to relieve any water pressure in hose or spray gun.

5.

See Storage section

in this manual for proper storage procedures.

Filter Screen

Filter Screen

High Pressure Hose

Water
Source

High Pressure Hose

Water
Source

Содержание DAPC D25690





















Отзывы: