2
© 2003 ITW Finishing Systems and Products
E
E
Model Part Number
Example:
SRI-G210B-08
Fluid nozzle size
(08 = 0,8 mm)
Aircap
EC Declaration of Conformity
We:
ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK
, as the
manufacturer of the
Spraygun model SRi
, declare, under our sole responsibility, that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999;
and thereby conform to the
protection requirements of Council Directive
98/392/EC
relating to
Machinery Safety Directive
,
and;
EN
13463-1:2001,
council Directive
94/9/EC
relating to
Equipment and Protective
Systems intended for use in Potentially Explosive Atmospheres
protection level
II 2 G X
.
This product also complies with the requirements of the EPA guidelines, PG6/34.
Transfer efficiency certificates are available on request.
B. Holt,
General Manager
30th June 2003
ITW Finishing Systems and Products reserve the right to modify equipment specification without prior notice.
Operation Manual
Devilbiss SRi – Gravity Spraygun
Important
Read and follow all instructions and Safety Precautions before using
this equipment
Description
The Devilbiss SRI is a small Gravity fed Spraygun designed for spraying spot repairs
and small areas. It is approved to ATEX regulations
94/9/EC
, protection level;
II 2 G X, Suitable for use in Zones 1 and 2
Important:
These Sprayguns are suitable for use with both waterbased and solvent based
coating materials. The design uses EPA compliant atomising (Devilbiss Trans-Tech®)
technology to reduce overspray and improve coating efficiency. Nozzles and Needles are
manufactured in Stainless Steel. These guns are not designed for use with highly corrosive
and/or abrasive materials and if used with such materials it must be expected that the need for
cleaning and/or replacement of parts will be increased. If there is any doubt regarding the
suitability of a specific material contact your local Distributor or ITW Finishing direct.
