Page 6 SB-2-301-Q
MBC Conversion Kit KK-5026 -
This conversion kit contains the
components required to convert a standard MBC-510 to an
MBC-ZINC gun. Used to apply organic and inorganic zinc materials.
ACCESSORIES
1/01
©Copyright 2001, ITW DeVilbiss
Printed in U.S.A.
Contains all necessary
tip, hose and nut sizes
used on or with gun.
WR-103 Wrench
These brushes are help-
ful in cleaning threads and
recesses of gun body.
42884-214-K5 3/8"
42884-215-K10 5/8"
Cleaning Brushes
HD-503
SolventSaver™
Hose/Gun
Cleaner
2 Qt. & 2-1/2 Gal hose/
gun cleaner used to clean
the inside of hose, fluid
passageways of gun &
other paint equipment.
QMGZ
SolventSaver ™
Hose/Gun
Cleaners
2 Gallon galvanized tank
used to clean the inside
of hose and material pas-
sages of the gun.
JGA-156-K10
Spring Clip
Joins any single piece
DeVilbiss air cap with lat-
est version MBC-368 or
MSA-1 retaining ring.
Helps prevent parts loss
and provides easier as-
sembly.
Compatible with all paint
materials: contains no sili-
cone or petroleum distil-
lates to contaminate paint.
MSDA sheet available
upon request.
Spray Gun Lube
SSL-10 (2 oz.
bottle)
HAV-500 OR
HAV-501
Adjusting Valve
(HAV-501 SHOWN)
HAV-500 does not have
pressure gage. Use to
control air usage at gun.
VS-531 Low
Pressure
Strainers
The VS-531 Low Pres-
sure Fluid Strainer pro-
vides a final filter for trap-
ping foreign particles in
the paint supply.
MB-135-K9
Leather
Packings
Optional packings used
commonly with abrasive
materials. Use (3) in
place of A-23 packing.
Enables user to control
and reduce air usage at
the gun. Ideal for low
pressure spraying.
P-H-5516 Air
Adjusting Valve
HAF-507
Whirlwind™
In-Line Air Filter
Removes water, oil, and
debris from the air line.
Quick Disconnect Approved for
HVLP Guns (Air)
High Flow Ball and Ring Type
HC-4419 1/4"
NPS(F)
HC-4699
1/4" NPT(M)
HC-1166
1/4" NPT(M)
HC-4700
1/4" NPT(M)
Provides greater
degree of control
over cup fluid
pressure.
KB-555 (Aluminum) &
KB-545-SS (S/S) 2 qt. Pressure
Feed Cup With Regulator
NIOSH-Certified
(TC-84A-1623 for respira-
tory protection in atmo-
spheres not immediately
dangerous to life.)
MSP-524 Twin
Cartridge, Paint
Spray Respirator
TGC-545 (Aluminum) TLC-555
(Teflon Lined)
TSC-595 S.S. 2 Qt. Drip-Free
Suction Cup
Cup has a unique, two position
valve which permits selection of
either a drip-free or conventional
open vent mode.
DeVILBISS WORLDWIDE SALES AND SERVICE LISTING – www.devilbiss.com
INDUSTRIAL FINISHING
DeVilbiss has authorized distributors throughout the world.
FOR TECHNICAL ASSISTANCE OR THE DISTRIBUTOR NEAREST YOU,
CALL TOLL FREE 1-888-992-4657 (U.S.A. AND CANADA ONLY). FOR LOCAL CALLS, SEE LISTING BELOW.
U.S.A./Canada Sales & Customer Service Office
Address
Telephone No.
GLENDALE HEIGHTS, IL 60139
195 Internationale Blvd.
(360) 237-5000
Toll Free Fax No.1-877-790-6965
WARRANTY
This product is covered by DeVilbiss' 1 Year Limited Warranty.
See SB-1-000 which is available upon request.