manualshive.com logo in svg

DeVilbiss MAX-504, Руководство пользователя, Страница: 16 / 16

Поделиться
Скачать
DeVilbiss MAX-504 Скачать руководство пользователя страница 16

Page 16      SB-2-226-B

DeVILBISS WORLDWIDE SALES AND SERVICE LISTING – www.devilbiss.com

WARRANTY

This product is covered by DeVilbiss' 1 Year Limited Warranty. See SB-1-000 which is available upon request.

INDUSTRIAL FINISHING

DeVilbiss has authorized distributors throughout the world. 

FOR TECHNICAL ASSISTANCE OR THE DISTRIBUTOR NEAREST YOU,

CALL TOLL FREE 1-888-992-4657 (U.S.A. AND CANADA). FOR LOCAL CALLS, SEE LISTING BELOW.

U.S.A./Canada Sales & Customer Service Office

Address

Telephone No.

GLENDALE HEIGHTS, IL 60139

195 Internationale Blvd.

(630) 237-5000

Toll Free Fax No.1-877-790-6965

3/01

©Copyright 2001, 

 DeVilbiss

     Printed in U.S.A.

GC-100-K4 (4 each)

or GC-100-K48

(48 each)

Disposable Spray

Gun Covers

Save money by reduc-
ing cleaning time and
maintenance with
these covers that also
limit operator expo-
sure to overspray.

HD-503

SolventSaver™

Hose/Gun Cleaner

QMGZ

SolventSaver™

Hose/Gun

Cleaner

Spray Gun Lube

SSL-10 (2 oz. bottle)

Compatible with all
paint materials: con-
tains no silicone or pe-
troleum distillates to
contaminate paint.
MSDS available upon
request.

2 Gal. (8.5 liters) gal-
vanized tank used to
clean the inside of
hose and material
passages of the
gun. Available in
U.S. only.

OMX-5033-46MP Or

OMX-5033-83MP

Air Cap Test Kit

Measures atom-
izing pressure at
the air cap.  Used
to confirm pres-
sure in states
where legislation
prohibits pres-
sures over 10 psi
(.7 bar).

ACCESSORIES

2 Qt. (2.1 liters) Hose/
Gun Cleaner used to
clean the inside of
hose, fluid passage-
ways of gun & other
paint equipment.
Available in U.S. only.

Содержание MAX-504

















Отзывы:

Нет отзывов