4 - ENG
HAZARD
RISK OF
ELECTRICAL SHOCK
RISK FROM
FLYING OBJECTS
RISK TO BREATHING
RISK FROM
MOVING PARTS
RISK OF BURNS
WHAT CAN HAPPEN
REPAIRS ATTEMPTED BY UNQUALIFIED
PERSONNEL CAN RESULT IN SERIOUS
INJURY OR DEATH BY ELECTROCUTION.
ELECTRICAL GROUNDING:
FAILURE TO
PROVIDE ADEQUATE GROUNDING TO THIS
PRODUCT COULD RESULT IN SERIOUS
INJURY OR DEATH FROM ELECTROCU-
TION.
SEE GROUNDING INSTRUCTIONS.
THE
COMPRESSED AIR
STREAM
CAN
CAUSE SOFT TISSUE DAMAGE
TO EX-
POSED SKIN
AND CAN PROPEL
DIRT,
CHIPS,
LOOSE PARTICLES
AND SMALL
OBJECTS AT
HIGH SPEED
, RESULTING IN
PROPERTY DAMAGE OR PERSONAL INJURY.
THE
COMPRESSED AIR
FROM YOUR
COMPRESSOR
IS NOT SAFE FOR BREATH-
ING!
THE AIR STREAM MAY CONTAIN
CARBON MONOXIDE, TOXIC VAPORS OR
SOLID PARTICLES.
SPRAYED MATERIALS
SUCH AS PAINT,
PAINT SOLVENTS, PAINT REMOVER,
INSECTICIDES, WEED KILLERS, ETC..
CONTAIN HARMFUL VAPORS
AND POI-
SONS.
MOVING PARTS CAN CAUSE SERIOUS
INJURY
OR DAMAGE IF THEY COME INTO
CONTACT WITH YOU OR YOUR CLOTHING.
ATTEMPTING TO OPERATE OR REPAIR
COMPRESSOR WITH PROTECTIVE
SHROUDS REMOVED CAN EXPOSE YOU
TO MOVING PARTS AND ELECTRICAL
SHOCK.
A PORTABLE
COMPRESSOR CAN FALL
FROM A TABLE, WORKBENCH OR ROOF
CAUSING DAMAGE TO THE COMPRESSOR
WHICH COULD EXPOSE YOU TO HAZARD-
OUS MOVING OR ELECTRICAL PARTS.
THE
COMPRESSOR CYCLES AUTOMATI-
CALLY WHEN
THE
PRESSURE SWITCH IS
IN THE ON/AUTO POSITION.
TOUCHING EXPOSED
METAL SUCH AS THE
COMPRESSOR HEAD OR OUTLET TUBE
CAN RESULT IN SERIOUS BURNS.
HOW TO PREVENT IT
ANY
ELECTRICAL WIRING OR REPAIRS
REQUIRE ON THIS PRODUCT
SHOULD BE
PERFORMED BY AUTHORIZED SERVICE
CENTER PERSONNEL
IN ACCORDANCE
WITH NATIONAL AND LOCAL ELECTRICAL
CODES.
MAKE CERTAIN THAT
THE
ELECTRICAL
CIRCUIT
TO WHICH THE COMPRESSOR IS
CONNECTED
PROVIDES PROPER ELEC-
TRICAL GROUNDING, CORRECT VOLTAGE
AND ADEQUATE FUSE PROTECTION.
ALWAYS WEAR ANSI Z87.1 APPROVED
SAFETY GLASSES WITH SIDE SHIELDS
WHEN USING THE COMPRESSOR.
NEVER POINT ANY NOZZLE OR SPRAYER
TOWARD ANY PART OF THE BODY OR AT
OTHER PEOPLE OR ANIMALS.
NEVER INHALE AIR FROM THE COMPRES-
SOR
EITHER DIRECTLY OR FROM A
BREATHING DEVICE CONNECTED TO THE
COMPRESSOR.
WORK IN AN AREA WITH GOOD CROSS-
VENTILATION.
READ AND
FOLLOW THE
SAFETY INSTRUCTIONS
PROVIDED ON THE
LABEL OR SAFETY DATA SHEETS
FOR THE
MATERIAL YOU ARE SPRAYING.
USE A
NIOSH/MSHA APPROVED RESPIRATOR
DESIGNED FOR USE WITH YOUR SPECIFIC
APPLICATION.
DO NOT REMOVE THE PROTECTIVE
COVERS
FROM THIS PRODUCT.
NEVER
OPERATE
THE
COMPRESSOR WITH
GUARDS
OR COVERS WHICH ARE DAM-
AGED OR
REMOVED.
ANY
REPAIRS
REQUIRED ON THIS
PROD-
UCT SHOULD BE PERFORMED BY AUTHO-
RIZED SERVICE CENTER PERSONNEL.
ALWAYS
OPERATE COMPRESSOR IN A
STABLE SECURE POSITION
TO PREVENT
ACCIDENTAL MOVEMENT OF THE UNIT.
NEVER OPERATE COMPRESSOR ON A
ROOF OR OTHER ELEVATED POSITION.
USE ADDITIONAL AIR HOSE TO REACH
HIGH LOCATIONS.
ALWAYS
TURN OFF
THE
COMPRESSOR,
BLEED PRESSURE FROM THE AIR HOSE
AND TANK UNPLUG FROM ELECTRICAL
OUTLET BEFORE PERFORMING MAINTE-
NANCE OR ATTACHING TOOLS AND AC-
CESSORIES.
NEVER TOUCH ANY EXPOSED METAL
PARTS ON COMPRESSOR
DURING OR
IMMEDIATELY AFTER OPERATION.
COM-
PRESSOR WILL REMAIN HOT
FOR SEV-
ERAL MINUTES AFTER OPERATION.
CTMCWPS — 5/1/97
