background image

PAGE 

3

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and understand. This information relates to protect-
ing 

YOUR

 

SAFETY

 and 

PREVENTING

 

EQUIPMENT PROBLEMS

. To help you recognize this information, we use the

symbols to the right. Please read the manual and pay attention to these sections.

DANGER

 

indicates an imminently hazardous situation

which, if not avoided,

 

will

 

result in

 

death or serious

injury

.

WARNING

 

indicates a potentially hazardous situation

which, if not avoided,

 

could

 

result in

 

death or serious

injury

.

CAUTION

 

indicates a potentially hazardous situation

which, if not avoided,

 

may

 

result in

 

minor or moder-

ate injury

.

CAUTION

 

used without the safety alert symbol indi-

cates a potentially hazardous situation which, if not
avoided,

 

may 

result in

 

property damage

.

RISK OF

EXPLOSION OR FIRE

RISK OF BURSTING

GASOLINE AND 

GASOLINE VAPORS CAN

BECOME IGNITED

 BY COMING INTO CON-

TACT WITH HOT COMPONENTS SUCH AS
THE MUFFLER, 

FROM ENGINE EXHAUST

GASES, 

OR FROM AN ELECTRICAL SPARK.

COMBUSTIBLE MATERIALS WHICH COME
INTO CONTACT WITH  HOT ENGINE PARTS
CAN BECOME IGNITED.

UNATTENDED OPERATION OF THIS PROD-
UCT COULD RESULT IN PERSONAL INJURY
OR PROPERTY DAMAGE.

AIR TANK

THE FOLLOWING CONDITIONS COULD

LEAD TO A WEAKENING OF THE TANK, AND

RESULT IN A VIOLENT TANK EXPLOSION:

1.

FAILURE TO PROPERLY DRAIN

CONDENSED

  WATER FROM THE TANK,

CAUSING RUST AND THINNING OF THE
STEEL TANK.

2. 

MODIFICATIONS

 OR ATTEMPTED

REPAIRS 

TO THE TANK.

TURN ENGINE OFF AND ALLOW IT TO
COOL BEFORE ADDING FUEL TO THE
TANK.

  EQUIP AREA OF OPERATION WITH

A FIRE EXTINGUISHER CERTIFIED TO
HANDLE GASOLINE OR FUEL FIRES.

ADD FUEL OUTDOORS

 OR IN A WELL

VENTILATED AREA.  MAKE SURE THERE
ARE NO SOURCES OF IGNITION, SUCH AS
CIGARETTES NEAR REFUELING LOCA-
TION.

OPERATE COMPRESSOR

 IN AN OPEN

AREA 

 AWAY FROM

 DRY BRUSH, WEEDS

OR OTHER 

COMBUSTIBLE MATERIALS.

STORE FUEL IN A SECURE LOCATION
AWAY FROM COMPRESSOR.

ALWAYS 

REMAIN

 IN ATTENDANCE 

WITH

THE PRODUCT WHEN IT IS OPERATING.

DRAIN TANK DAILY OR AFTER EACH
USE.

  IF TANK DEVELOPS A LEAK,

REPLACE IT IMMEDIATELY WITH A NEW
TANK OR NEW COMPRESSOR OUTFIT.

NEVER

 DRILL INTO, WELD, OR 

MAKE ANY

MODIFICATIONS TO THE TANK

 OR ITS

ATTACHMENTS.

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

•  SAVE THESE INSTRUCTIONS •

IMPORTANT SAFETY INSTRUCTIONS

IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT
IN SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL
WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.

Содержание DACE-7161-2

































Отзывы: