background image

2- ENG

D25689

Read Operators Manual. Do not operate equipment until you have read operators
Manual for Safety, Assembly, Operation, and Maintenance Instructions.

This product may not be equipped with a spark arresting muffler. If the
product is not equipped and will be used around flammable materials, or on

land covered with materials such as agricultural crops, forest, brush, grass, or other similar items,
then an approved spark arrester must be installed and is legally required in the state of California.
It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the
California Public Resources Code, unless the engine is equipped with a spark arrester, as defined
in section 4442, and maintained in effective working order. Spark arrester are also required on
some U.S. Forest Service land and may also be legally required under other statutes and ordi-
nances.

Engine exhaust contains chemicals known, in certain quantities, to cause
cancer, birth defects or other reproductive harm.

CONSUMER SAFETY INFORMATION

CONSUMER GENERAL AND SERVICE INFORMATION

DO NOT RETURN THIS PRODUCT TO THE RETAILER! FOR SERVICE OPTIONS 

CALL: 1-800-888-2468, EXT. 2.

• Congratulations!  You have purchased a high quality product from America’s leading

manufacturer of pressure washers.  This pressure washer, when properly used and
maintained, will provide trouble free service.  Please read and follow these instructions for
proper use and maintenance.

• Please take the time now to register your pressure washer online at www.devap.com.

• All sales of pressure washers are final. Do not return this product to the retailer.

• If you experience any problems and need assistance, please call us at our toll free

number 

1-800-888-2468, Monday through Saturday, 8:00 a.m. To 6:00 p.m. C.S.T. 

• If repair or service part purchase is required, our many Authorized Warranty Service

Centers are conveniently located and equipped to handle all in-warranty and out-of-
warranty service.

• For the location of the nearest Authorized Warranty Service Center call 1-800-888-2468,

Ext. 2, 24 hours a day, 7 days a week or visit our web site @ devap.com.

• All pressure washers carry a manufacturer's one year warranty from date of purchase for

consumer use and a 90 day warranty for commercial use.

• Retain sales receipt as proof of purchase for warranty service.

Read and understand all safety warnings.

• Do not operate this unit until you have read and understand this Owners Manual for

Safety, Operation, and Maintenance Instructions.

• Do not operate this unit until you have read and understand the Engine Owners Manual

for Safety, Operation, and Maintenance Instructions.

Содержание D25689-E





















Отзывы: