Instruction Manual
Parts Descriptions
Specifications
NTSC PAL
1/3 Format Interline CCD Sensor
976(H) x 494(V) 976(H) x 582(V)
NTSC 2:1 Interlace PAL 2:1 Interlace
H:15750Hz V:59.94Hz H:15625Hz V:50.0Hz
1.0 Vpp BNC 75
Ω
unbalanced
650 TVL TYPE
Image Size
Pixel Element
Scanning Frequency
Video Output
* Night Mode: 700 TV Lines
Resolution
Minimum illumination
Day Mode: 0.3 Lux @ F1.2 (DSS OFF)
Day Mode: 650 TV Lines
* Night Mode: 0.01 Lux @ F1.2 (DSS OFF)
12VDC or 24VAC
5.7W Max
3Ø Green LED on Rear Panel
3pin Push Lock Terminal Block on Rear
4pin Connector on Rear
CS Mount, Change C Mount by Adaptor
Adjust by screw
1/4” Top and Bottom
73.5 mm(W) x 58 mm(H) x 126 mm (L)
IRIS Connector
Power Source
General
Power Consumption
Power Indicator
Video Drive
DC Drive
Lens Mount
Back Focus Adjust
Mounting Hole
External Dimensions
-10°C~50°C / -20°C~60°C
Operation/Storage Temperature
100~240 VAC
Mains Power
Low Voltage
* Night Mode is available Only for TDN Models
CQ Series
Motion Detection & Face Detection
High Resolution Box Camera
Never attempt to disassemble or modify the
camera. Any modification could lead to
damages that are not covered by the guarantee.
Make sure the power source is switched off and
the camera disconnected before installation.
Refer servicing to qualified personnel only.
To prevent fire or electrical shock, use only a
regulated power supply and the wiring used
should be appropriate for the input terminals.
Camera Installation
The camera can be mounted by using either the bracket
mount on the top or bottom (see part descripton 2).
The bracket mounts accept standard photographic mounting
bolts (1/4" BSW or 20 UNC).
For AC/DC Dual Power Model: The camera operates at either 24 VAC or 12 VDC.
For AC Mains Power Model: The camera operates at 100 ~240 VAC.
Connections are indicated in the rear panel of the camera.
The power supply must be a stable power source and should only be installed by qualified personnel.
The power LED on the rear panel is illuminated when the camera is connected to a power source.
Connect the 75 Ohm coaxial cable to video output (see part description 6).
Precautions
Connecting to the Power Source and Video Output
Do not expose or operate the camera in wet areas.
Moisture may damage the camera and also increase
the danger of electrical shock
Do not attempt to aim the camera at the sun or other
extremely bright objects, even when switched off.
This may cause damage to the CCD and invalidate
the warranty.
Do not touch the lens elements or the CCD with
your fingers while insalling or adjusting the camera.
This will reduce image quality or cause damage to
the camera.
This product must be installed and maintained in accordance with good
installation practices, by qualified personnel only.
To prevent damage to your camera or injury to yourself or to others, read and
comply with the safety precautions as follows:
Ver.03/2011
Please visit our website for more information:
www.deview.com
Product specifications subject to change without notice.
Certain product names mentioned herein may by trade names
and/or registered trademarks of other companies.
Ensure the bracket, screws (inc. wall plugs,
if used) and mounting surface can support
the load of the camera, lens and bracket.
Bracket Mount
Protective
Cover
3
CQ3/V531-CQ000-203
S/N Ratio
50 dB
Functional Specification
Exposure Control
AES
MES
Reverse Control
Auto White Balance (AWB)
Auto White Balance Range
Chroma
WDR Range
Day & Night
SYNC System
Auto IRIS Lens / Auto Electronic Shutter /
Manual Electronic Shutter
Auto Luminance Control
1/60 ( 1/50 ) ~ 1/100000 sec Max.
8 Step 1/60(NTSC)1/50 (PAL),
1/100(NTSC) 1/120(PAL), 1/250, 1/500,
1/1000, 1/2000, 1/5000, 1/10000
H-Reverse / V-Reverse / HV-Reverse
AWB / AWB-EX / Push White Balance /
Manual White Balance / AWB Speed
Standard Range: 2500K ~ 9500K
Extended Range: 1800K ~ 18000K
Level 0-15 Adjustable
53 dB Max
Auto / Day / Night
INT / Line Lock
Day/Night Switching Input Dry (voltage-free) contact, from external device
Manual White Balance Range
1x Preset, R Gain and B Gain Adjustable
Remote Control
RS-485
Motion Detection
ON / OFF
Digital Zoom
8x Max.
Face Detection
Yes, ON / OFF
3D DNR, OFF / Low / Middle / High / Auto / DVR
Digital Noise Reduction (DNR)
AGC Max Gain
36 dB
Top View
Side View
Rear View
Front View
1
2
SET
Control Key
SET
Control Key
4
5
AC/DC Dual Power
AC Mains Power
1. Back Focus Adjustment
2. Bracket Mount
3. Camera Sensor
4. OSD Navigation Pad
5. OSD Enter Button
6. BNC Composite Video Output
7. Second Video Output
8. DC Lens Connector
9. Video Lens Connetor
10. Motion/Face Detect Alarm Output
11. Day/Night Switching Input
12. RS-485 Connection Terminal
13. Power Input Terminel
14. AC Mains Power Input Connector
15. Power Lamp Indicator
D/N SW
6
7
8
9
13
12
Rt
ON
D/N SW
6
7
8
9
14
15
12
Rt
ON
D/N SW
11
10
Video Output
D/N SW
Rt
ON
Mains Power
Connector
Power Input
Terminal
Video Output
D/N SW
Rt
ON
Digital Slow Shutter (DSS)
2x, 4x, 8x, 16x, 32x, 64x,128x, 256x
Resolution Enhancement
Standard / Enhancement / Enhancement-EX
