4 . Remove the Controller Cap
Remove the controller cap using a coin to make adjustments.
(1) Auto Iris Level Adjustment
User needs to adjust the DC level especially for conditions described below:
¾
If camera is facing a window but is placed in a relatively dark room.
¾
If the subject background is extremely bright or dark.
¾
If brightness of the picture on the monitor is incorrect.
Auto Iris Level
- (counterclockwise): To decrease the contrast
+ (clockwise): To increse the contrast
(2) Function Selection Switch
FL (Flickerless)
If the camera is used with 50Hz fluorescent lighting, flicker may appear on the screen. In this case,
ch should be set to FL position and switched to OFF position under normal lighting.
FL swit
AGC (Auto Gain Control)
Set to AGC position, camera’s sensitivity is automatically increased when level of
ambient light drops. AGC function automatically controls signal gain to a maximum of 28dB.
AES (Auto Electronic Shutter)
Set to OFF mode for auto iris control and AES mode for fixed or manual iris
control (The default is OFF mode, this option is not applicable for units fitted with a DC iris lens)
BLC (Back Light Compensation)
This function set to BLC position, is useful when the camera is facing an object
that has excessive light behind it (Ex.: Camera installed facing the doorway).
(3) IR Distance Adjustment
Installer may use IR adjustment function according to installation conditions. It is suggested that the view angle
should be checked before setting up the IR distance.
Table below is the suggested LED brightness and IR distance adjustment:
LED
Brightness
IR Distance
Focal Length
H (High)
25m~40m
9~22mm
M (Middle)
15m~25m
6~12mm
L (Low)
10m~15m
3.7~6mm
5. Install Sunshield
To install the sunshield, please follow the instruction shown right:
SPECIFICATIONS
Pick up Element
1/3” Sony Super HAD Hi-Res. CCD
1/3” Sharp Hi-Res. CCD
Effective Picture Element
NTSC: 768(H) x 494(V); PAL: 752(H) x 582(V)
Synchronization
Internal
Scanning System
2:1 Interlace
Resolution
Horizontal 550 TV Lines
Horizontal 540 TV Lines
Sensitivity
0 Lux with IR-LED Built in
S/N Ratio
> 48dB (AGC Off)
Gain Control
High / Low Selectable
Electronic Shutter
NTSC: 1/60 ~ 1/100000s ; PAL: 1/50 ~ 1/110000s
Flickerless
On / Off Selectable
Back Light Compensation
On / Off Selectable
White Balance
Auto White Balance (2000 K ~ 10000K)
Gamma Characteristic
0.45
Video Output
1.0 Vp-p / 75 Ohms. BNC Connector.
Lens Built in
DC Dirve Varifocal Lens with Removable IR-Cut Filter
3.7 – 12 mm / F1.6, Wide: 83.9°x61.9°; Tele: 23.91°x17.93°(HxV)
[Optional: f9 – 22 mm / F2.0, Wide: 83.9.°x61.9°; Tele: 23.91°x17.93°(HxV)]
Operating Temperature
-10 ~ +50 degree C/ RH85% or Less
Power Consumption
840mA Max (IR On)
250mA Max (IR Off)
780mA Max (IR On)
190mA Max (IR Off)
Luminary
42 units of 850nm IR LED
IR Project Distance
40 Meters – Low / Mid / High Selectable
Power Supply
DC 12V ± 10 %
Specifications are subject to change without prior notice.
Support: Security Manufacturing Ltd, Tel: +44 1254 302 492
www.devieweurope.com
