Develop FK-506, Руководство пользователя

Страница: 281 / 316

Troubleshooting
7
FK-506 7-3
7 Troubleshooting
7.1 Main error messages and their remedies
Message Cause Remedy
LINE PROBLEM
CHECK LINE • The telephone dialing system
and telephone wiring system is
not set correctly.
• The telephone cord is not cor-
rectly connected.
• Check telephone dialing sys-
tem and telephone wiring sys-
tem, and then specify the
correct settings in Utility mode.
• Connect the telephone cord
correctly.
COMMUNICATION
ERROR (####)
(PRESS ANY KEY) • Communication was not possi-
ble due to a problem in the ma-
chine.
• Communication was not possi-
ble due to the condition of the
recipient/caller’s fax machine.
Press any key to check the details
of the error in the printed trans-
mission or reception report. Then,
check the communication set-
tings, and try communicating
again.
REDIAL ALL FAILED All redial attempts failed because
either the recipient’s line is busy or
there was no answer. Check the condition of the recipi-
ent’s line, and then try sending the
fax again.
PRINT CANCEL
XXXX Server An e-mail message that cannot be
printed by this machine was re-
ceived. (For a file attachment in a
format other than TIFF-F) Ask the sender to send a TIFF-F
file or text in the correct format.
MEM.FULL/TX CAN-
CEL When sending a fax, the size of
the image data exceeded the ca-
pacity of the memory. • Retrieve the reception data
stored in the memory.
• Send the fax by direct trans-
mission.
MEM.FULL/RX CAN-
CEL When receiving e-mail, the size of
the image data exceeded the ca-
pacity of the memory. Retrieve the reception data stored
in the memory.
MEMORY FULL
*******
(PRESS ANY KEY) When receiving a fax, the size of
the image data exceeded the ca-
pacity of the memory. Retrieve the reception data stored
in the memory.
MEMORY FILE FULL
XXXX Server While receiving e-mail, the maxi-
mum number of files stored in the
memory was exceeded. Retrieve the reception data stored
in the memory.
HUNG UP THE
PHONE The receiver of the connected tel-
ephone has been picked up. Return the receiver of the con-
nected telephone to its cradle.
Check Fax Mode A fax error occurred while an op-
eration was being performed in
Copy mode. Press the [Fax] key.
If an error is displayed, perform
the appropriate remedy according
those described in "Main error
messages and their remedies" on
page 7-3.
COMMUNICATION
ERROR An error occurred when connect-
ing to the server. Check the network settings. Try
communicating again and, if an
error is displayed, contact the net-
work administrator.