manualshive.com logo in svg

DEVA DB910, Инструкция по эксплуатации, Страница: 7 / 43

Поделиться
Скачать
DEVA DB910 Скачать руководство пользователя страница 7

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 7 -

General Information

Inspired by DEVA continuous strive for excellence, and based on our long-term formative 

experience in the field of IP audio broadcasting tools, DEVA product portfolio is extended with yet 

another strategic solution - the DB910 Full Duplex IP Audio Codec.

A full duplex solution when two tools are in use, the DB910 allows you to send and receive 

audio at the same time, while guaranteeing fast and easy monitoring of the signal fed to the 

transmitter. Where two-way transmission is not required, DB910 may be used as a decoder, being 

fully compatible with DEVA’s already widely-known hallmark IP audio codecs.

The  real  time  audio  encoding/decoding  into  a  high  quality  configurable  format  process  is 

uncompromisingly guaranteed by the powerful DSP processor. Supporting all the mandatory 

compressed audio streams and lossless, uncompressed PCM stream, the DB910 can be used for 

a wide range of professional audio applications: Broadcast, Internet Radio, Studio to Transmitter 

Link and VoIP.

Apart from its main audio source, DB910 supports several IP audio sources and a built-in MP3 

Backup Audio Player in addition. With several backup audio sources incorporated, the DB910 will 

immediately switch between the sources when the audio is lost, and return to the main one when 

the audio is restored, with no user intervention. The audio content for the MP3 player is recorded 

on  the  internal  SD  card. The  backup  files  can  be  managed  remotely  through  the  built-in  FTP 

Server, via standard FTP client.

Combining the super compact form of the DB90 and some of the most impressive features of 

the renowned DB9000 line in a single product, the DB910 will meet the requirements of the most 

demanding broadcasters. This advanced radio gear is equipped with two-way GPIOs and RS-232 

serial communication that could be used for telemetry and automation. The front panel audio level 

bar graphs and LED indicators of the unit allow reading the current state of the device at a glance.

Controlled through a simple and intuitive HTML5 interface and any kind of web browser, be it 

your PC, smart phone or tablet, the DB910 could be managed remotely or locally.

DB910 is the ultimate all-in-one solution to maintain your competitiveness, combining essential 

professional applications and key trends.

Содержание DB910












































Отзывы:

Нет отзывов