DEVA DB91-RX, Инструкция по техническому обслуживанию и эксплуатации

Страница: 31 / 35

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 31 -
HARDWARE RESET
This process will fully restore DB91-RX to its Factory Defaults, including the Network settings.
Hardware Reset can be done by following the next steps:
1. Disconnect the power supply cable from the unit;
2. Locate the RESET button on Rear panel;
3. Press and hold the RESET button;
4. Connect the power supply cable to the unit;
5. Keep the RESET button hold until the POWER led starts blinking;
6. Release the RESET button;
7. Wait for DB91-RX to reboot.
Upon completion of the process DB91-RX settings will have the following values:
Network Default Settings
• DHCP : enabled
WEB Server Default Settings
• Port : 80
•
Username
: user
• Password : pass
NOTE:
Upon completion of the process, the DHCP Client is enabled, and the DB91-RX will
obtain IP Address from DHCP server shortly.
ATTENTION: Please note that the WEB Server’s Port, Username and Password will be
changed, so it is possible the page not to be loaded after restoring factory defaults. You may be
asked to re-enter the encoder’s address and/or username and password.