DEVA Broadcast DB9009-TX, Инструкция по техническому обслуживанию и эксплуатации

Страница: 39 / 52

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 39 -
IP AUDIO
IP Audio Server
-
Encoder
– select the encoder to be used - PCM (16bit), Encoder 1 or Encoder 2.
- Port – specify the TCP port of the stream server. The default value is 5000.
- Pre-buffer – initial amount of data sent to the client. Large value decreases startup delay
caused by buffering on the client side. This also introduces the displayed amount of latency in the
audio.
-
Max clients
– the maximum number of simultaneously connected clients. The maximum
connections supported is 10. The default value is 5.
IP Audio Sender 1/2/3
RTP Settings require Decoders’ Server Address and Port to be entered in the respective fields:
-
Address
– URL or IP Address of the RTP Receiver.
- Port – UDP port of the RTP Receiver.
The RTP sender supports multicast streaming. In this mode Multicast Group address should be
entered in the Address field.
Icecast Settings
If DB9009-TX is used as an Icecast Source Mount point, Encoder IP Address and Port should
be filled in. The username and password are used to secure the connection. Make sure to enter the
same information on both sides of the connection.
-
Address
– URL or IP Address of the Icecast Server;