65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 48 -
Communication
Network
The network addresses could be set manually (static IP) or automatically via a
DHCP Server
.
To set static
IP
,
MASK
,
GATEWAY
and
DNS
addresses, the
DHCP
should be disabled. In order
for the built-in
DHCP
client to be activated, the function should be enabled. When the
DHCP
client is activated, all assigned values will be shown in the relevant fields on the “Status Screen”.
If due to any reason, the DHCP procedure cannot be completed, DB6400 will use Auto IP and will
generate an
IP Address
.
SNMP Agent
Specify
Agent ID
,
Agent Port
,
Read/Write Communities
,
Manager IP
,
Manager Port
and
Session Timeout
.
Agent
– enables/disables SNMP Agent.
Agent ID
– is used for identification of the device among others, when an SNMP notification
is being sent.
Once all needed settings are applied, use the Test button to generate a test notification, which
upon success will be received by the SNMP Manager.
Press the [Download] button to download the latest available DB6000 SNMP MIB file.
NOTE:
The MIB file may vary from one firmware revision to another. Downloading this file
from the device, guarantees that you have the proper MIB file.
Enter the desired notification recipients in
E-mail 1
and/or
E-mail 2
fields. Fill in your e-mail
account settings:
Sender
,
Username
and
Password
,
Server
,
SNMP port
and
Connection Type
.
We recommend you to use the [Test] button and generate a test e-mail, which upon success will
be delivered to the specified
E-mail 1
and/or
E-mail 2
.
Example of Test E-mail Message:
DB6400 Test Message.
Please do not reply to this e-mail.
Содержание DB6000
Страница 5: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...
