DEVA Broadcast DB4402 Скачать руководство пользователя страница 53

Страница: 53 / 58

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 53 -

Firmware Update

If needed, DB4402’s firmware could be updated. Updating the firmware will ensure:

•

New function(s);

•

Improved performance;

•

Eliminated bugs (if any).

To update the device firmware, please follow the steps listed below:

- Press the ‘Browse’/’Choose File’ button and select the new firmware file;

- Press the “Upload” button;

- Wait for the process to complete.

NOTE:

Checking for updates regularly will ensure that the device is functioning correctly, and

avoid potential problems.

Reboot Device

Pressing Reboot button will initiate a ‘hardware reset’ as if you have switched off and on the

device. The previously applied/saved settings will not be deleted.

Factory Defaults

DB4402 could be restored to Factory Defaults from its non-volatile memory. The procedure is

quite simple - Press the ‘Restore Button’ and confirm the procedure.

WARNING:

Before returning DB4402 to its factory defaults, all remote users should be

informed that they may cease to communicate with the device.

Session Timeout

Set WEB and SNMP sessions timeout.

PLEASE NOTE

that during session, the Logger mode

is not active, thus no Alarms are generated.

SNMP MIB File

Press the ‘Download’ button to download the latest available DB4402 SNMP MIB file.

NOTE:

The MIB file may vary from one firmware revision to another. Downloading this file

from the device guarantees that you have the proper MIB file.

Содержание DB4402



























































Результаты поиска

Содержание DB4402

Отзывы:

Похожие инструкции для DB4402

Бренды по названию

Популярные бренды

DEVA Broadcast DB4402, Инструкция по эксплуатации

Результаты поиска

Содержание DB4402

Отзывы:

Похожие инструкции для DB4402

Бренды по названию

Популярные бренды