DEVA Broadcast DB3010, Руководство по эксплуатации и обслуживанию

Страница: 46 / 58

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 46 -
Once the
Range
,
Thresholds
,
Trigger
and
Release times
are set, the preferred alarm type should
be selected.
PLEASE HAVE IN MIND
that if the alarm notification is globally disabled, notification will
not be sent, and the event will only be registered in the Log.
Stereo Loss Alarm, IP Link Alarm, Internet Stream Alarm
The settings applied to these alarms are identical and are explained in details below.
Enable – In order for the alarm to be generated, the function should be enabled;
Trigger Time
– waiting time before active alarm is generated;
Release Time
– waiting time before idle alarm is generated.
Stereo Loss Alarm
,
IP Link Alarm
and
Internet Stream Alarm
are flags related alarms, meaning
that:
• Stereo Loss – when the indicator points at Stereo on the interactive slider, the device is
working properly. If the indicator is under Mono , an alarm will be generated because of
Stereo loss.
• IP Link – when the indicator points at UP on the interactive slider, the device is working
properly. If the indicator is under Down , an alarm will be generated because the IP link is
lost.
• Internet Stream – when the indicator points at Connected on the interactive slider, the
device is working properly. If the indicator is under Idle , an alarm will be generated because
the device will not be able to obtain stream.
We recommend, as a preferred notification method in case IP Link alarm is generated, GPO
to be set as when IP link is missing
Email
and
SNMP
could not be sent, and he event will only be
registered in the Log. You will be notified of the event upon the IP link is restored.
NOTE:
For detailed information on Alarm trigger and notifications refer to “APPENDIX A :
Alarm Triggers” on page 53 .