10
Assembly from crates:
Mount front rotary
swaths
For linking the front swath section to the rear one, follow these steps:
>
Remove front rotary assembly from the crate and place securely on sup-
ports.
>
Mount tandem axle (optional extra) in the same way as for the rear chas-
sis.
>
Attach front swath with bolts (ø 35) to the cross beam and secure with
clamping pin.
>
Second bolt (ø 25) and secure with washer and split pin.
>
Run hydraulic tubes and cables underneath the cover.
>
Fasten cover with screws.
>
Pass hydraulic tubes and cables through the stay bar.
>
Connect the tubes to their appropriately marked connections (see hydrau-
lic schematics)
>
Fasten clamping piece in vertical position.
Bolt ø 35
Bolt ø 25
Cover
Stay
Clamping piece
