DEUTSCHMANN AUTOMATION V3470E, Краткая инструкция

Страница: 4 / 21

3.12.13
Starterkit ROTARNOCK with PROFIBUS V. 1.2
4
Deutschmann Automation GmbH & Co. KG Introduction
1 Introduction
In order to be able to follow this brief instruction step-by-step you have to install a few software
programs on your PC:
Programming software „WINLOC32“ on the Support CD under:
\Software\WINLOC\32Bit\SETUP_WINLOC_
29* _D.exe

The menu item can be found under

„Programme\Deutschmann\LOCON_ROTARNOCK\WINLOC32\DEUTSCH“
Data component generator „DBGenerator“ on the Support CD under:
\Software\Tools\NEW DB Generator\SetupS7DBGenerator.exe

The menu item can be found under

„Programme\Deutschmann\LOCON_ROTARNOCK\tools\S7DBGenerator
Data component simulator „DBSimulator“ on the Support CD under:

\Software\Tools\DB Simulator\SetupDBSimulator.exe

The menu item can be found under

„Programme\Deutschmann\LOCON_ROTARNOCK\tools\Datenbausteinsimulator
After the software-installation the hardware is to be set up as described in the „appendix“.
*Version status