DEUTSCHMANN AUTOMATION UNIGATE IC-DeviceNet, Инструкция по эксплуатации

Страница: 37 / 48

Error handling at UNIGATE® IC Deutschmann Automation GmbH & Co. KG
37 Instruction manual UNIGATE
®
IC - DeviceNet V. 4.0 9.2.22
10 Error handling at UNIGATE
®
IC
A distinction can be made between two categories of system-errors:
Serious errors (1-4): In this case, the Gateway must be switched off and switched back on again.
If the error occurs again, the Gateway must be exchanged and returned for repair.
Warnings (6-15): These warnings are displayed for one minute simply for information purposes
and are then automatically reset. If such warnings occur frequently, please inform After-Sales
Service.
The system-error can be read-out via the Script.
Error no. Error description
0 Reserved
1 Hardware fault
2 EEROM error
3 Internal memory error
4 Fieldbus hardware error or wrong Fieldbus-ID
5 Script error
6 Reserved
7 RS-transmit buffer overflow
8 RS-receive buffer overflow
9 RS timeout
10 General fieldbus error*
11 Parity-or frame-check-error
12 Reserved
13 Fieldbus configuration error
14 Fieldbus data buffer overflow
15 Reserved
Table 1: Error handling at UNIGATE
®
IC
Flashing frequency 2 times per second (system error)
*) The system-error 10 is always displayed when one of the following errors appears:
Error Error value
DUP_MAC_ERROR 0x0001
RX_QUEUE_OVERRUN 0x0002
TX_QUEUE_OVERRUN 0x0004
IO_SEND_ERROR 0x0008
CAN_BUS_OFF 0x0010
CAN_OVERRUN 0x0020
EXPL_CNXN_TIMEOUT 1) 0x0040
IO_CNXN_TIMEOUT 0x0080
IO_CNXN_DELETE 0x0100
DNS_RESET 0x0200
DNS_BUS_SENSE_ERROR 0x0400
1) Timeout = Expected Packed Rate * 4!
With the Script command "
Get (DetailErrorCode, w_Error)
" the above value can be
read out and with it it can be exactly determined, what error was the actuator.