Deutschmann Automation GmbH & Co. KG
27.03.2009
Description Developerkit UNIGATE® IC-AB V1.01
9
Multi-pin connector (with jumper) signals series connection:
The signals of the series connection between IC and RS drivers are applied on this
jumper strip. I. e. you can disconnect the lines here and also directly tap the signals
of the series interface.
Multi-pin connector (with jumper) SUPI3/SUPI4:
ONLY FOR Interbus!
A selection is made via this multi-pin connector of whether the UNIGATE® IC Interbus
is equipped with a SUPI3 or SUPI4 Interbus processor. Default = SUPI3.
GND multi-pin connectors (3x):
These 3 contacts serve as GND potential for measuring purposes.
Hole matrix:
The hole matrix with the most
important signals allows a
customised hardware extension, e.
g. in order to connect a D/A
converter.
Multi-pin UG-IC with or without Magnetics:
The multi-pin connectors are not equipped and, thus,
the option “
UG-IC without Magnetics”
is currently not
available. The option ”
UG-IC with Magnetics“
is
securely jumpered!
Mounting holes:
5 holes are provided for (optional) mounting. In order to be able to use these, the rubber feet must
first be removed.
The respective Bus connections or Bus connector is/are provided on the Bus side in
accordance with the norm or market standard. The respective Bus status LEDs are
additionally provided
è
Function, please see the respective UNIGATE® IC manual.
