manualshive.com logo in svg

DEUTSCHMANN AUTOMATION UNIGATE CL, Инструкция по эксплуатации, Страница: 26 / 49

Поделиться
Скачать
DEUTSCHMANN AUTOMATION UNIGATE CL Скачать руководство пользователя страница 26

15.8.14

 

UNIGATE

®

 fieldbus gateway UNIGATE

®

 CL PROFINET 2Port V. 1.6

26

Deutschmann Automation GmbH & Co. KG

FTP-Server

11 FTP-Server

This UNIGATE

®

 features an integrated FTP-Server, which can access the file system of the 

device.
The FTP-Server is password protected and can be addressed via the user name "deutschmann“ 
and the password “deutschmann“. Ever since the Firmware-Version 2.3.6 the login data can be 
defined by setting the Script parameter „

FTP_Password

“ and „

FTP_UserName

“.

11.1  Script-update via FTP

The dcs-file generated by the Protocol Developer has to be stored as "

script.dcs

" by the FTP 

on the Gateway. Transfer the file to the UNIGATE

®

When the writing procedure is done, please disconnect the connection and restart the device. 
The UNIGATE

®

 identifies the file, takes over the Script and deletes it afterwards.

11.2  System configuration update via FTP

A WINGATE gwc-file has to be stored on the Gateway as "system.gwc" via FTP. Transfer the file 
to the UNIGATE

®

. When the writing procedure is done, please disconnect the connection and 

restart the device. The UNIGATE

®

 identifies the file, takes over the script and deletes it after-

wards.

Содержание UNIGATE CL


















































Отзывы:

Нет отзывов