DEUTSCHMANN AUTOMATION LOCON 100, Инструкция по эксплуатации

Страница: 14 / 30

Offset-table Deutschmann Automation GmbH & Co. KG
14 Instruction manual LOCON 100 / 200 and ROTARNOCK 80 / 100 with fieldbus connection V. 1.0 22.1.08
6.11 LOGIC-function: LOGIC
Structure Value Function Length
ProgNo from 0 to MAX_PROG BYTE
DestNo from 1 to 16 0 deletes complete logic function BYTE
DestType 0 = hardware output
1 = flag
2 = hardware output inverted
3 = flag inverted BYTE
OpNo1 1 - 32 BYTE
OpType1 0 = internal cam control output
1 = input: hard-/software
2 = flag
3 = SR (shift register)
4 = PB (only LOCON 200)
input
BYTE
LogicFct1-2 0 = none
1 = or
2 = and
3 = or not
4 = and not BYTE
OpNo2 1 - 32 BYTE
OpType2 see OpType1 BYTE
LogicFct2-3 see LogicFct1-2 BYTE
OpNo3 1 - 32 BYTE
OpType3 see OpType1 BYTE
LogicFct3-4 see LogicFct1-2 BYTE
OpNo4 1 - 32 BYTE
OpType4 see OpType1 BYTE
OutputDelay ms at present max. 255 WORD
OutputTrigger 0 = leading edge
1 = trailing edge BYTE
Module number
(only LOCON 200) 0 basis
x I/O-module number BYTE
6.12 GSD-modules for Profibus cam control
GSD-file Module Cam control
R80 “S7DB(universal)“ ROTARNOCK 80
R100 “S7DB(universal)“ ROTARNOCK 100
R100 “S7DB(uni.)+logic16“ ROTARNOCK 100 with logic
L100 “S7DB(universal)“ LOCON 100
L100 “S7DB(uni.)+logic8“ LOCON 100 with 8 logic inputs
L100 “S7DB(uni.)+logic16“ LOCON 100 with 16 logic inputs
L200 “L200-Basis(S7-mode)“ LOCON 200 (incl. logic)
L200 IO8 “L200-IO8“ LOCON 200-IO8-expansion