2
Initial Assembly
Safety Instructions
Maintenance & Storage
Specifications & Controls
Mowing & Transporting
Maintenance
Mower Decals
Exploded Views & Parts Lists
Warranty
INDEX
INITIAL ASSEMBLY
2
3
4
5
6-7
8-9
10
11-15
16
(
Tools Required: Two 13mm open-ended spanners)
1. Remove the mower from the packaging and visually check for damage.
2. Raise the mower handle to its normal position until the holes in the plates at the bottom of the handles align
with the holes in the engine mounting plate. Insert the 8mm x 20mm bolts in the two holes, attach nuts then
tighten all four handle attachment bolts.
3. Insert the end of the vertical gear change rod on the left side of the handle through the hole in the short lever
on the left side of the engine plate, then insert an R clip through the small hole in the end of the rod.
4. Raise the foot operated clutch pedal and insert the end of the 10mm rod under the engine plate into the hole in
the end of the clutch pedal lever. Insert an R clip into the hole in the end of the rod.
5. Thread the mower cord through the guide on the righthand handle.
foot operated
clutch pedal
vertical gear
change rod
R clip
10mm rod
