Initial operation
WARNING:
Please check that the DALI LIGHT track has been installed correctly
before you insert the BL-201-12-868 ERCO FLEX into the rail.
Be sure that L1 and L2 are not connected to 230V AC line voltage!
To mount the controller BL-201-12-868 ERCO FLEX, plug in the module
housing into the DALI light track as shown in the following picture. Take
care that the two rocker levers are in the unlocked front position.
First, lock the controllers housing in the DALI light track with the first
rocker lever, as shown below:
Page 5
Page 6
In the second step, set up the electrical connections by turning the
second rocker lever into the locked position, as shown below.
When the installation is done, the controller BL-201-12-868 is fully
functional within a few seconds.
Functional description:
The BL-201-12-868 ERCO FLEX light controller can only be configured
with the PC software BL-PC-FLEX.
Without this software, a setup of the controller is not possible.
The software BL-PC-FLEX, together with the also necessary EnOcean
USB-stick, is available as part nr. #11228.
Page 7
Page 8
A
rt
.-
N
r.
1
1
3
3
1
