Dettson OMF098J10B, Инструкции по установке и руководство для владельца

Страница: 14 / 23

14
Table 6: Technical specifications
MULTI POSITIONS MODELS - SERIES 098
RATING AND PERFORMANCE
Firing rate (USGPH)* 0.50 0.60 0.70 0.50 0.60 0.70
Input (BTU/h)* 70 000 84 000 98 000 70 000 84 000 98 000
Maximum Heating capacity, (BTU/h)* 59 000 70 000 81 000 59 000 70 000 81 000
Heating temperature rise (Degr. F)*
Flue draft with chimney (inch of w.c.)
Overfire pressure with chimney (inch of w.c.)
Flue pressure with direct vent (inch of w.c.)
Overfire pressure with direct vent (inch of w.c.)
BECKETT BURNER; MODEL NX (Chimney or DV)
Burner tube insertion length (inches)
Head type
Nozzle (Delavan) 0.40 - 60A 0.50 60A 0.60 - 60A 0.40 - 60A 0.50 - 60A 0.60 - 60A
Pump pressure (PSIG)* 155 145 135 155 145 135
Head/Air setting 0.5 1.5 2.5 0.5 1.5 2.5
AFUE % (From CSA B212 standard and Canadian regulation)**
85.0 ‡
84.2 81.9
85.0 ‡
84.2 81.9
AFUE % (From ASHRAE 103 standard and US regulation)** 85.0 ‡ 83.9 81.9
85.0 ‡
83.9 81.9
RIELLO BURNER; MODEL 40-F3 (Chimney)
Burner tube insertion length (inches)
Nozzle (Delavan) 0.40 - 70A 0.50 - 70A 0.60 - 70A 0.40 - 70A 0.50 - 70A 0.60 - 70A
Pump pressure (PSIG)* 155 145 135 155 145 135
Combustion air adjustment (turbulator/damper) 0 / 1.5 0 / 2.5 1 / 3.5 0 / 1.5 0 / 2.5 1 / 3.5
AFUE % (From CSA B212 standard and Canadian regulation)** 85.0 ‡ 84.2 81.9
85.0 ‡
84.2 81.9
AFUE % (From ASHRAE 103 standard and US regulation)** 85.0 ‡ 83.9 81.9
85.0 ‡
83.9 81.9
RIELLO BURNER; MODEL 40-BF3 (Direct vent DV)
Burner tube insertion length (inches)
Nozzle (Delavan) 0.40 - 70A 0.50 - 70A 0.60 - 70A 0.40 - 70A 0.50 - 70A 0.60 - 70A
Pump pressure (PSIG)* 155 145 135 155 145 135
Combustion air adjustment (turbulator/damper) 0 / 3.25 0 / 4 1 / 5.25 0 / 3.25 0 / 4 1 / 5.25
AFUE % (From CSA B212 standard and Canadian regulation)** 85.0 ‡ 84.2 81.9
85.0 ‡
84.2 81.9
AFUE % (From ASHRAE 103 standard and US regulation)** 85.0 ‡ 83.9 81.9
85.0 ‡
83.9 81.9
ELECTRICAL SYSTEM
Volts - Hertz - Phase
Rated current (Amps)
Minimum ampacity for wire sizing (Amps)
Max. fuse size (Amps)
Control transformer (VA)
External control power available Heating (VA)
Cooling (VA)
BLOWER DATA
Heating blower speed at 0.25" W.C. SP MED-LOW MED-HIGH HIGH
Heating blower speed at 0.50" W.C. SP MED-LOW MED-HIGH HIGH
Motor (HP) / number of speeds
Blower size (diam. x width)
GENERAL INFORMATION
Overall dimensions (width x depth x height)
Supply air opening (width x depth)
Return air opening (width x depth)
Filter size (depth x hieght x thickness)
Shipping weight Lbs/Kg
Air conditioning, maximum output (tons) at 0.5 SP
10'' x 8'' 10'' x 8''
2.5 3.0
20'' x 20'' 20'' x 20''
125 / 57 125 / 57
16'' x 19'' 16'' x 19''
30 30
See the ECM air flow table
1/3 HP / 4 speeds 1/2 HP / ECM
40 40
40 40
115 - 60 - 1 115 - 60 - 1
15 15
10.3
13.7 12.2
12.2
BF3 BF3
2 3/4'' 2 3/4''
F3 WITH AIR INLET DAMPER F3 WITH AIR INLET DAMPER
2 3/4'' 2 3/4''
1 3/4'' 1 3/4''
6 - Slot LQ head 6 - Slot LQ head
-0.035 to +0.010
+0.03 to +0.15
NX56LQ NX56LQ
UNITS WITH 1/3 HP PSC MOTOR UNITS WITH 1/2 HP ECM MOTOR
55 - 85 Degr. F 55 - 85 Degr. F
-0.06 to -0.025 -0.06 to -0.025
-0.035 to +0.010
19'' x 19'' 19'' x 19''
+0.05 to +0.20 +0.05 to +0.20
+0.03 to +0.15
16.875'' x 20 1/8'' x 40 3/4'' 16.875'' x 20 1/8'' x 40 3/4''
* INPUT & OUTPUT ADJUSTMENT
Pump pressure can be adjusted to maintain proper firing rate.
‡ =
Increase pump pressure if flue gases temperature is under 400˚F
Adjust the total flue gas temperature between 400˚F and 575˚F (330˚F and 505˚F net approximately)
** AFUE value established after minimum 20 hours of operation.