background image

Setting Limits for Continuous Run Condition

The values for high temperatures and low temperature allow the engine to run
continuously to heat or cool the vehicle interior, when outside temperatures exceed
set limits. The values set in this section are a guideline. Factors such as sunload,
vehicle body style, and location may affect these values. The factory default
settings are 32°C (90°F) for the upper limit, and -3°C (25°F) for the lower limit.

1. Press 

 until the 

 icon is displayed and enter the correct password.

Entering the wrong password will either flash a password code back to the user or
return the user to the Main Display. Refer to section "Password Entry".

2. Press 

after the password is entered, and the display will show the current

outside temperature and the   and 

 icons. This value is shown to help

determine the desired upper and lower temperature limits for the Continuous Run
condition.

3. Press 

 until the 

 and 

 icons are displayed with the 

 icon and the

numbers flashing.

4. Use 

 or 

 to change the high limit. Temperatures above this value allow

the engine to run continuously, if needed, to keep the vehicle interior cool. The
range for this setting is 26 - 48°C (80 -120°F).

5. Press 

 to save your changes and return to the Main Display. Press 

 to

continue to make other limit changes.

6. Press 

 and 

 and 

 are displayed with 

 and the numbers flashing.

7. Use 

 or 

 to set the lower limit. If the outside temperature falls below

this value, the engine is allowed to run continuously, if needed, to heat the vehicle
interior. The range for this setting is -15 to -1°C (5 - 30°F).

8. Press 

 to save your changes for Continuous Run and return to the Main

Display. Press 

 to continue to change other limits.

Setting the Minimum Comfort Zone

The Comfort Zone is the number of degrees (Celsius or Fahrenheit) from the
Optimized Idle thermostat set point before the engine runs to heat or cool the
vehicle interior. The larger the Comfort Zone, the longer the time between
Thermostat Mode engine starts. The minimum Comfort Zone can be set and the
driver will not be able to choose a Comfort Zone lower then the minimum set.

Optimized Idle User Manual

All information subject to change without notice.

 21

DDC-SVC-MAN-0019 

Copyright © 2016 DETROIT DIESEL CORPORATION

Содержание Optimized Idle






























Отзывы: