background image

For Your Safety

If you smell gas:

 

•  Do not try to light any appliance.  

• Immediately call your gas supplier from a neighbor’s phone.

•  Do not touch any electrical switch. 

• Follow the gas supplier’s instructions. 

•  Do not use any phone in your building.   • If you cannot reach your gas supplier, call the fire department.
 

DX2 Series 

Insert Manual

For complete installation instructions, reference the Tube Heater General Manual that 
accompanies this insert manual. 

WARNING

!

Improper installation, adjustment, alteration, service or maintenance can cause 
property damage, injury or death. Read the installation, operation and maintenance 
instructions thoroughly before installing or servicing this equipment. 
This heater must be installed and serviced by trained gas installation and service 
personnel only.  Failure to comply could result in personal injury, asphyxiation, death, 
fire or property damage. 

In locations used for the storage of combustible materials, signs must be posted to 
specify the maximum permissible stacking height to maintain the required clearances 
from the heater to the combustibles. Signs must either be posted adjacent to the 
heater thermostats or in the absence of such thermostats, in a conspicuous location.

Not for residential use!

 Do not use this heater in the home, sleeping quarters, 

attached garages, etc.   Installation of a commercial tube heater system in residential 
indoor spaces may result in property damage, serious injury, asphyxiation or death.

The DX2 Series Infrared Tube Heater is a positive pressure, single-stage radiant heater system. This 
insert manual is a supplement to the Tube Heater General Manual and provides specific information 
related to the DX2 Series model.  All persons involved with the installation, operation and maintenance of 
the heater system must read and understand the information in this insert manual and the accompanying 
Tube Heater General Manual.

INSTALLER: Present this manual to the end user.

Keep these instructions in a clean and dry place for future reference.

Model#:

 ___________________

Serial #:

 _________________________

LIODX2a-Rev. 18111

Print: 1M -08/16_r2-01/17 (CDS)

Replaces: LIODX2a-5c-07/15 (CDS)

(located on rating label)

Содержание DX2 Series





















Отзывы: