104918 sheet 4
Detex panic device gate mounted instructions
(Value Series shown, Advantex similar)
(continued from sheet 2)
A1:
Install device plastic
template into
mounting plate
STEP A:
Install device mounting plate
A2:
Align strike holes in template
with strike holes in bracket
A3:
Mark & drill holes for mounting plate.
A4: NOTE: IF 03GS Lock Box or 08GS / 08GSN Trim Spacers are to be used, see next page
before doing step A4.
Use tek screws & lockwashers supplied in device
hardware kit to attach mount plate to gate
(machine screws and nuts also supplied).
A5:
Install 2 tek screws to
secure strike bracket to gate
pole using 2 of the pre-drilled
bracket holes.
Strike bracket must be parallel
with gate plate.
Continue exit device installation using instructions supplied with exit device.
Detex panic device mounting hardware supplied with Detex device.
Install strike per
device instructions.
Hardware included
with exit device.
