8555-0550-0M Rev B
y
MedVue with Wi-Fi and Bluetooth
6
Changing the Network Credentials
To change the network credentials, perform the following steps:
1. With the MV1C turned ON and in the Gross weight mode, press and hold the
CLEAR
key for approximately 3 seconds.
2. The display will change to show
SETUP REVIEW
.
3. Release the
CLEAR
key.
4. The display changes to show:
5. Press the
ID/HEIGHT
key until
bLE/WIFI
is shown in the Menu area of the display.
6. Press the
ENTER
key until the prompt
CLR WIFI CREdS
is displayed.
7. With the display showing
CLR WIFI CREdS
, press the
1
(YES) key and then press the
ENTER
key. This will clear the network credentials.
8. Press the
ID/HEIGHT
key until the display returns to the normal weight display.
9. Repeat the steps in the Configure Wi-Fi Network Module on the previous page to set
the new network credentials
SEtuP
CAL
SYSTEM
Menu Display
Settings Display
