Installation Manual of DTC-NVR-S-HD8
3
Chapter 3
Interface Description
3.1
Front Panel Introduction
POWER ALARM Tx/Rx HDD READY ARCHIVE
Figure 3. 1
View of Front Panel
Table 3. 1
Description of Front Panel
No.
Name
Description
1
Status LED
Indicators
Power
Power indicator is red in standby status and green if the device is running.
Alarm
The indicator status is programmable via system SDK.
Tx/Rx
Tx/Rx blinks in red or green color when there is network data transmission.
HDD
HDD indicator blinks when hard disk writing or reading.
Ready
The indicator status is programmable via system SDK.
Archive
The indicator status is programmable via system SDK.
2
Backup Button
The button response is programmable via system SDK.
3
USB Ports
Universal Serial Bus (USB) 3.0 ports for additional devices such as USB mouse
and USB Hard Disk Drive (HDD).
4
Power Button
Press the Power button for over 1.3 seconds to shut down the device, yet if you
press more than 4 seconds, the device will be shutdown forcedly.
5
Channel Status Indicators
The indicator status is programmable via system SDK. The indicator color can be
set as red or green color.
6
Front Panel Lock
You can lock or unlock the panel by the key.
