CABLE MANAGEMENT
When installing equipment, either on the worksurface or below, be sure that the
connecting cables are free of obstruction. A trough is provided to manage excess
base controller wires and can be found on the underside of the worksurface.
Use this trough to minimize possible entanglements.
WORKSTATION DESIGN TIPS
•
Ensure that power cords for all accessory items—computers, lights, monitors,
etc.—are of sufficient length to reach outlets throughout the range of
worksurface height adjustment. Do not subject the cords to any strain while
adjustment of the surface is taking place.
•
Always check for proper operating clearance before placing any item on,
above or below the worksurface.
MAINTENANCE AND CLEANING
Regularly clean dust and dirt from lifting columns. To ensure all surfaces are
thoroughly cleaned, make sure the lifting columns are fully extendend to their
maximum height. Also, be sure to inspect Cables and Lifting Columns for
damage. Check all connections for both correct function and secure mounting.
Caution:
A damp cloth is recommended. To protect the painted surfaces, use a
cleanser that is not too highly alkaline or acidic. A pH neutral product is ideal.
Note:
Please do not move your table on your own. Guidelines have been set-up
on how to move each table and are incorporated in the installation instructions.
Contact your Facilities group for assistance.
Содержание Adjustables 7
Страница 1: ...USER GUIDE 7 8 9...
