DETAIL K2 OPG777(G), Инструкция по сборке

Страница: 17 / 37

v.210816 | 17
PARTS & SCHEMATICS
PARTS LIST
No. Specification No. Specification
1 Engine 35 Big washer
2 M10 locknut 36 Engine pulley
3 Dia. 10 lockwasher 37 Key
4 Washer dia. 10 x dia. 20 x 1.5 38 Engine spacer
5 Bolt M8 x 25 39 Bolt M8 x 65
6 Dia. 8 lockwasher 40 Wheel axle
7 Washer dia. 8 x dia. 16 x 1.5 41 Bolt M10 x 125
8 Protection sheet plate 42 Leather protect sheet
9 Protection sheet 43 Leather protect sheet fixed plate
10 Knob dia. 50 44 M8 locknut
11 Bolt M8 x 30 45 Half-round head square neck bolt M10 x 45
12 Rubber 46 Metal plate
13 D-pin dia. 8 x 50 47 Frame
14 Support foot 48 Inner six angle cylinder bolt M14 x 95
15 Vertical seat bearing 49 Bolt M8 x 80
16 Dia. 14 lockwasher 50 M8 nut
17 Washer dia. 14 x dia. 28 x 2 51 Bolt M10 x 50
18 M14 locknut 52 Bolt M10 x 100
19 M10 nut 53 Bolt M6 x 40
20 Bolt M10 x 35 54 Washer dia. 6 x dia. 12 x 1.2
21 Right cutter 55 M6 locknut
22 Left cutter 56 Lower part of handle
23 Straight cutter 57 Right tire
24 Cutter rotor 58 Left tire
25 Side spacer 59 Ring type lock
26 Key 60 Handle adjusted bar
27 Belt cover accessory plate 61 Bolt M16 x 310
28 Rotor pulley 62 Handle
29 Belt 63 Key switch
30 Big washer 64 Stop wire
31 Bolt M10 x 25 65 Throttle
32 Bolt M8 x 16 66 Tow bar
33 Belt cover 67 Hitch trailer
34 Engine bolt 68 Bolt M10 x 80
ENGLISH