6
6. Getting started
6.1.
Insert the batteries into the battery compartment, observ-
ing correct polarity. The device will now start and perform a
test for functionality. The appearance of a message on the dis-
play and audible signal indicates the functionality of the de-
vice.
6.2.
When using an AC voltage source, connect an AC adapter
to the device before connecting it to the wall socket.
6.3.
To change the batteries, open the battery compartment on
the bottom of the housing (see Fig. 3) carefully pushing back
the cover latch.
The device retains the stored treatment programs when chang-
ing the batteries.
Attention!
The device has an add-in unit warning of the battery dis-
charge with an audio signal of three beeps. In which case, the display
shows “LOW BATTERY”, and the device switches off . To continue opera-
tion, it is necessary to change the batteries or connect an AC adapter.
Fig. 3