Operation
EN
20 / 32
07/2020
LED color
Description
Action to do
Yellow
Incomplete rundown
Tighten again.
Yellow and red (orange)
Reject report
Loosen and tighten again.
Red
Above max. limits
Remove and replace the fastener.
How to have the batch count on the tool display
Go to the system/tightening unit/tool settings.
Go to the tightening unit.
Check that "Batch count" or "Ellipse" is ticked in the menu "Display parameters".
When the process is done, results are displayed.
Torque and angle values
Batch count
Ellipse
The ellipse represents the batches.
In this example, 3 tightenings out of 4 are completed.
How to interact on the Assembly Process
Press the left button to
abort
the Assembly Process.
The following actions are protected by the "Maintenance" password.
To have them available, enter the Maintenance password in the "Configuration" menu.
During the Assembly Process, press the
left
button to activate the actions.
Batch increment
To
skip
one bolt.
Batch decrement
To
redo
the last bolt.
Batch reset
To
restart
the complete batch.
How to reverse the rotation
In the following illustration, the tool is shown without its protective cover.