manualshive.com logo in svg

Desoutter 6151657310, Инструкция по эксплуатации продукта, Страница: 13 / 24

Поделиться
Скачать
Desoutter 6151657310 Скачать руководство пользователя страница 13

EN

Operation

06/2020

13 / 24

How to read the tightening report

LED color

Description

Action to do

Green

Accept report

None

Yellow

Incomplete rundown

Tighten again.

Yellow and red (orange)

Reject report

Loosen and tighten again.

Red

Above max. limits

Remove and replace the fastener.

How to reverse the rotation

1

Run reverse button

Press this button.

Red and green LEDs are blinking alternatively.

Apply the tool to the fastener and press the trigger.

How to smooth the tool stop

The "Ergostop" function must be disabled for tightening tests or certification on tightening benches.

Ergostop allows a smoother tool stop to reduce the torque reaction on the operator.
When delivered, this function is disabled.

Go to the main screen.

Press this button during 2 seconds.

Go to 

Ergostop

. Use the buttons to enable or disable the function, save and validate.

How to wake up EAB tools

The tool display switches off automatically after 2 minutes of inactivity.

Press the trigger.

The tool powers off after 30 minutes of inactivity.
Long press the reverse button.

Refer to "Power off" configurable on the tool display.

Unplug and plug the battery pack.

Results monitoring

Connect the tool to a PC by using the eDOCK device.

Содержание 6151657310

























Отзывы:

Нет отзывов